Easy worn out parts & Spare parts equipments (六類)
產品 1. 
90m,135m roller box front panel
產品 2. 
90m roller box back side panel
2）. Spiral bevel gear& bevel gear box
產品 3. 
90m spiral bevel gear of bevel gearbox
產品 4 . 
90m spiral bevel gear
產品 5. 
Bevel gearbox spiral gear
產品6.
135m bevel gearbox spiral gear
3）. Shaft of roller box
產品 7. 
84m,90m roll shaft of roller box
產品 8. 
135m roll shaft of roller box
產品 9. 
84 m roll shaft of roller box
4）. Bevel gearbox & roller box
產品 10. 
84m Bevel gearbox, roller box
產品 11. 
84m 8″bevel gearbox, roller box group
產品 12. 
84m 6″bevel gearbox, roller box group
產品 13. 
84m bevel gearbox, roller box group
產品14. 
84m 6″roller box
產品15. 
90m 8″roller box
產品16.
10″roller box
產品 17 
84m 6″roller box
產品 18. 
84m 6″roller box
產品 19. 
90m 6″roller box
產品 20. 
135m 6″roller box
5). Eccentric Locking Collar
產品21. 
Eccentric Locking Collar
產品22. 
90m,135m Eccentric Locking Collar
6）. Other spare parts
產品23. 
6″8″10″taper sleeve
產品24. 
90m bevel gearbox core part
產品25. 
10″roller box adjustment feed screw and nut
產品26. 
90m 6″8″adjustment feed screw and nut
產品27. 
90m roller box sealing ring
產品28. 
90 m slip ring
產品29 
135m6″8″eccentric disc
產品30 
135m slip ring
產品31. 
135m adjustment feed screw and nut
產品 32. 
135m taper sleeve
產品33. 
135m bevel gearbox Counter shaft
產品34. 
Protective cap
PS: 以上所有的小零部件都可以寫同樣的描述：
The rolling mill is including many component parts. If lack of any part of this machinery can not complete the job properly. And there is a separate function and greater parts.
After several years of rapid development, the new design theory and methods, new materials, the emergence of new technology, machinery parts into a new stage of development, good processing properties can be greatly reduced processing power, and material consumption,
Shorten cycle times and lower scrap rates, etc., reduce product costs.
To ensure that components can work in the specified operating conditions and during the life of our parts are all provisions must meet the following requirements:
1、Sufficient strength
To ensure that components do not occur in the external force destruction, a prerequisite when components can work properly, so the strength of the component is the ability to resist damage in the external force components.
2 Has sufficient rigidity
Deformation under external force generating components within the limits should be allowed. Ability to resist deformation components in the external force, that is, members have stiffness.
3、 Has sufficient stability
Components the ability to maintain the original form of balance.
In short, the strength, rigidity and stability and mechanical properties of materials used in the relevant
